PartsTable
Technical Data Sheet
Download PDF

001-302-15 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

001-302-15: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: SILICONE, design_type: THREADED, thread_class: 2B, special_features: THE MATTERIAL FOR THE BODY & SHELL IS BRASS, end_item_identification: GHAWK ASIP, part_name_assigned_by_controlling_agency: SMALL MALE CAP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-613-0107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
001-302-15
NSN: 5340-01-613-0107
FSC: 5340 — Hardware, Commercial
CAGE: A356N — BERTIN EXENSOR AB (SWE)
SPECIFICATIONS
materialSILICONE
design_typeTHREADED
thread_class2B
special_featuresTHE MATTERIAL FOR THE BODY & SHELL IS BRASS
end_item_identificationGHAWK ASIP
part_name_assigned_by_controlling_agencySMALL MALE CAP
connector_nominal_thread_size_for_which_designed36.0 INCHES IN
NSN5340-01-613-0107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 001-302-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 36.0 INCHES IN
•
THREAD CLASS: 2B
•
MATERIAL: SILICONE
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED36.0 INCHES IN
SPECIAL FEATURESTHE MATTERIAL FOR THE BODY & SHELL IS BRASS
PART NAME ASSIGNED BY CONTROLLING AGENCYSMALL MALE CAP
THREAD CLASS2B
END ITEM IDENTIFICATIONGHAWK ASIP
MATERIALSILICONE
SUBSTITUTES & CROSS-REFERENCES 2
202112Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
21-0245Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 001-302-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 001-302-15?
001-302-15 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 001-302-15?
There are 2 known substitutes for 001-302-15: 202112, 21-0245. Substitute compatibility should be verified for your specific system.
What is the NSN for 001-302-15?
001-302-15 is cataloged in the U.S. Government catalog under NSN 5340-01-613-0107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 001-302-15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.