PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 001-200974
001-200974 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.2500 INCHES NOMINAL IN, bore_diameter: 2.0000 INCHES NOMINAL IN, style_designator: STEEP ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2282, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
001-200974
NSN: 3110-00-198-2282
FSC: 3110
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.2500 INCHES NOMINAL IN
bore_diameter2.0000 INCHES NOMINAL IN
style_designatorSTEEP ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-198-2282
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 001-200974 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CONE WIDTH: 1.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: STEEP ANGLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CONE WIDTH1.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORSTEEP ANGLE
MATERIALSTEEL OVERALL
BORE DIAMETER2.0000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
667276Interchangeable
interchangeable cross-reference
interchangeable
H924045H924010Interchangeable
interchangeable cross-reference
interchangeable
A-A-59651Interchangeable
interchangeable cross-reference
interchangeable
A-A-59651-080Interchangeable
interchangeable cross-reference
interchangeable
163D13Interchangeable
interchangeable cross-reference
interchangeable
200974Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 001-200974?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 001-200974?
001-200974 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 001-200974?
There are 31 known substitutes for 001-200974: 667276, H924045H924010, A-A-59651 and 28 more. Substitute compatibility should be verified for your specific system.
Is 001-200974 still available?
001-200974 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 001-200974

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026