PartsTable
Technical Data Sheet
Download PDF

001-106 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

001-106: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 1.750 INCHES NOMINAL IN, center_hole_diameter: 1.306 INCHES MINIMUM AND 1.341 INCHES MAXIMUM IN, cross-sectional_height: 0.311 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, material_document_and_classification: 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-433-9637, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
001-106
NSN: 5330-00-433-9637
NIINs: 004339637, 011635606, 014260017
FSC: 5330 — Packing and Gasket Materials
CAGE: 05262 — FREUDENBERG-NOK GENERAL PARTNERSHIP (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter1.750 INCHES NOMINAL IN
center_hole_diameter1.306 INCHES MINIMUM AND 1.341 INCHES MAXIMUM IN
cross-sectional_height0.311 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
cross-sectional_shape_styleU
material_document_and_classification9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-433-9637
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 001-106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.311 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
HARDNESS RATING: 87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 1.750 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.306 INCHES MINIMUM AND 1.341 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.311 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
HARDNESS RATING87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER1.750 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.306 INCHES MINIMUM AND 1.341 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
001106000AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
2070-21PC44Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 001-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 001-106?
001-106 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 001-106?
There are 2 known substitutes for 001-106: 001106000A, 2070-21PC44. Substitute compatibility should be verified for your specific system.
What is the NSN for 001-106?
001-106 is cataloged in the U.S. Government catalog under NSN 5330-00-433-9637. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 001-106

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.