PartsTable
Technical Data Sheet
Download PDF

001-086 — SENSOR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

001-086: SENSOR.

The SENSOR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 92.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.500 INCHES NOMINAL IN, center_hole_diameter: 1.042 INCHES MINIMUM AND 1.077 INCHES MAXIMUM IN, cross-sectional_height: 0.249 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, material_document_and_classification: IDSA9250,FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-303-6843, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
001-086
NSN: 5305-00-303-6843
NIINs: 003036843, 005625441, 011606696
FSC: 5305 — Screws
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating92.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.500 INCHES NOMINAL IN
center_hole_diameter1.042 INCHES MINIMUM AND 1.077 INCHES MAXIMUM IN
cross-sectional_height0.249 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
cross-sectional_shape_styleU
material_document_and_classificationIDSA9250,FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5305-00-303-6843
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 001-086 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM
•
NOMINAL THREAD DIAMETER: 0.099 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM
NOMINAL THREAD DIAMETER0.099 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 416
SUBSTITUTES & CROSS-REFERENCES 1
782229-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 001-086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 001-086?
001-086 is a SENSOR.
What parts can replace 001-086?
There is 1 known substitute for 001-086: 782229-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 001-086?
001-086 is cataloged in the U.S. Government catalog under NSN 5305-00-303-6843. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 001-086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.