PartsTable
Technical Data Sheet
Download PDF

001-001542-000 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

001-001542-000: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEXAGON, head_height: 0.156 INCHES NOMINAL IN, thread_length: 0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, fastener_length: 6.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-676-1345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
001-001542-000
NSN: 5305-01-676-1345
FSC: 5305 — Screws
CAGE: 02FP7 — INSITU, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEXAGON
head_height0.156 INCHES NOMINAL IN
thread_length0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
fastener_length6.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.4375 INCHES NOMINAL IN
end_item_identificationTEST SET FREQ
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
NSN5305-01-676-1345
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 001-001542-000 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.156 INCHES NOMINAL IN
•
FASTENER LENGTH: 6.000 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.156 INCHES NOMINAL IN
FASTENER LENGTH6.000 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.4375 INCHES NOMINAL IN
END ITEM IDENTIFICATIONTEST SET FREQ
THREAD QUANTITY PER INCH20
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
92198A566Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 001-001542-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 001-001542-000?
001-001542-000 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 001-001542-000?
There is 1 known substitute for 001-001542-000: 92198A566. Substitute compatibility should be verified for your specific system.
What is the NSN for 001-001542-000?
001-001542-000 is cataloged in the U.S. Government catalog under NSN 5305-01-676-1345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 001-001542-000