PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 000S64
000S64 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2A A, thread_length: 0.875 INCHES NOMINAL IN, pin_grip_length: 1.125 INCHES NOMINAL IN, special_features: 2 FLATS ON UNTHREADED END OF SHANK 0.047 IN. DEEP BY 0.375 IN.

LG 180 DEG APART IN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-352-7282, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000S64
NSN: 5315-00-352-7282
FSC: 5315
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2A A
thread_length0.875 INCHES NOMINAL IN
pin_grip_length1.125 INCHES NOMINAL IN
special_features2 FLATS ON UNTHREADED END OF SHANK 0.047 IN. DEEP BY 0.375 IN. LG 180 DEG APART IN
thread_directionRIGHT-HAND
pin_overall_length2.000 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
pin_overall_diameter0.5000 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5315-00-352-7282
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 000S64 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN GRIP LENGTH: 1.125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
PIN OVERALL DIAMETER: 0.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
PIN OVERALL LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN GRIP LENGTH1.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
SPECIAL FEATURES2 FLATS ON UNTHREADED END OF SHANK 0.047 IN. DEEP BY 0.375 IN. LG 180 DEG APART IN
PIN OVERALL DIAMETER0.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
PIN OVERALL LENGTH2.000 INCHES NOMINAL IN
THREAD LENGTH0.875 INCHES NOMINAL IN
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
D124Interchangeable
interchangeable cross-reference
interchangeable
ADK-052Interchangeable
interchangeable cross-reference
interchangeable
24425Interchangeable
interchangeable cross-reference
interchangeable
MB2578PC12Interchangeable
interchangeable cross-reference
interchangeable
12Z10013-13Interchangeable
interchangeable cross-reference
interchangeable
F40Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 000S64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000S64?
000S64 is a PIN,STRAIGHT,THREADED.
What parts can replace 000S64?
There are 9 known substitutes for 000S64: D124, ADK-052, 24425 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 000S64?
000S64 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-352-7282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000S64

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026