PartsTable
Technical Data Sheet
PartsTable / O-RING / 000991047-002
000991047-002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-107-4954, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000991047-002
NSN: 5331-01-107-4954
FSC: 5331 — O-RING
CAGE: 07332 — WAUKESHA BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-107-4954
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000991047-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.818 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.818 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
1-13996Interchangeable
interchangeable cross-reference
interchangeable
C9-816-01-0001Interchangeable
interchangeable cross-reference
interchangeable
13996Interchangeable
interchangeable cross-reference
interchangeable
GRC5284-1225Interchangeable
interchangeable cross-reference
interchangeable
16204Interchangeable
interchangeable cross-reference
interchangeable
B01579Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 000991047-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000991047-002?
000991047-002 is a O-RING.
What parts can replace 000991047-002?
There are 22 known substitutes for 000991047-002: 1-13996, C9-816-01-0001, 13996 and 19 more. Substitute compatibility should be verified for your specific system.
Is 000991047-002 still available?
000991047-002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000991047-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026