PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 000959-111
000959-111 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, center_hole_diameter: 0.424 INCHES NOMINAL IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.103 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-995-9039, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000959-111
NSN: 5330-00-995-9039
FSC: 5330
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
peripheral_diameter0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
center_hole_diameter0.424 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.103 INCHES NOMINAL IN
NSN5330-00-995-9039
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000959-111 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.424 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.424 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AS568-111NMIL-R-83248 TY1 CL1Interchangeable
interchangeable cross-reference
interchangeable
RS900W&111Interchangeable
interchangeable cross-reference
interchangeable
MS17413-111Interchangeable
interchangeable cross-reference
interchangeable
V0747 2-111Interchangeable
Same NIIN cross-reference
interchangeable
A111SR270-70Interchangeable
Same NIIN cross-reference
interchangeable
060959-111Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 000959-111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000959-111?
000959-111 is a PACKING,PREFORMED.
What parts can replace 000959-111?
There are 6 known substitutes for 000959-111: AS568-111NMIL-R-83248 TY1 CL1, RS900W&111, MS17413-111 and 3 more. Substitute compatibility should be verified for your specific system.
Is 000959-111 still available?
000959-111 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000959-111

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026