PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00086
00086 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include body_material: STEEL, valve_quantity: 35, special_features: SPRINKLER CONTROL PANEL, valve_operation_method: AUTOMATIC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-1614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00086
NSN: 5310-00-167-1614
FSC: 5310
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
body_materialSTEEL
valve_quantity35
special_featuresSPRINKLER CONTROL PANEL
valve_operation_methodAUTOMATIC
NSN5310-00-167-1614
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00086 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT DIAMETER: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
•
DRIVE POINT QUANTITY: 8
•
THREAD SERIES: UNEF
•
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD QUANTITY PER INCH: 24
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
MATERIAL: STEEL COMP 8740 OVERALL
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
NUT DIAMETER0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
DRIVE POINT QUANTITY8
THREAD SERIESUNEF
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD QUANTITY PER INCH24
NOMINAL THREAD SIZE0.562 INCHES IN
MATERIALSTEEL COMP 8740 OVERALL
NUT STYLEROUND
DRIVE POINT DEPTH0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
NUT THICKNESS0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
999F0722 PC 48Interchangeable
interchangeable cross-reference
interchangeable
72-6970-534Interchangeable
interchangeable cross-reference
interchangeable
5314Interchangeable
interchangeable cross-reference
interchangeable
5164462Interchangeable
interchangeable cross-reference
interchangeable
714080Interchangeable
interchangeable cross-reference
interchangeable
A-1450Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00086?
00086 is a RESTRICTOR,FLUID FLOW.
What parts can replace 00086?
There are 17 known substitutes for 00086: 999F0722 PC 48, 72-6970-534, 5314 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00086?
00086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-1614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026