PartsTable
Technical Data Sheet
Download PDF

00085311087506 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

00085311087506: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SPRING, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 9.508 INCHES NOMINAL IN, accommodated_shaft_diameter: 8.250 INCHES NOMINAL IN, reference_data_and_literature: SKF PRODUCT DATA SHEET STOCK NUMBER 82526, part_name_assigned_by_controlling_agency: HDS2 SEAL LONGLIFE LIP CODE V. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-576-4425, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00085311087506
NSN: 5330-01-576-4425
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SPRING
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter9.508 INCHES NOMINAL IN
accommodated_shaft_diameter8.250 INCHES NOMINAL IN
reference_data_and_literatureSKF PRODUCT DATA SHEET STOCK NUMBER 82526
part_name_assigned_by_controlling_agencyHDS2 SEAL LONGLIFE LIP CODE V
NSN5330-01-576-4425
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00085311087506 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
REFERENCE DATA AND LITERATURE: SKF PRODUCT DATA SHEET STOCK NUMBER 82526
•
HOUSING BORE DIAMETER: 9.508 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 8.250 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.625 INCHES NOMINAL IN
REFERENCE DATA AND LITERATURESKF PRODUCT DATA SHEET STOCK NUMBER 82526
HOUSING BORE DIAMETER9.508 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER8.250 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYHDS2 SEAL LONGLIFE LIP CODE V
MATERIALSTEEL CASE
MATERIALRUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT
MATERIALSTEEL CORROSION RESISTING SPRING
SUBSTITUTES & CROSS-REFERENCES 2
959E462-15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2058G57 PT NO 4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 00085311087506?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00085311087506?
00085311087506 is a SEAL,PLAIN ENCASED.
What parts can replace 00085311087506?
There are 2 known substitutes for 00085311087506: 959E462-15, 2058G57 PT NO 4. Substitute compatibility should be verified for your specific system.
What is the NSN for 00085311087506?
00085311087506 is cataloged in the U.S. Government catalog under NSN 5330-01-576-4425. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00085311087506