PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00085311019071
00085311019071 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 8.0 MILLIMETERS NOMINAL MM, outside_diameter: 62.2 MILLIMETERS NOMINAL MM, special_features: DUAL LIP W/O INNER CASE,BORE TITE ON THE O.D., surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-509-1484, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00085311019071
NSN: 5330-01-509-1484
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width8.0 MILLIMETERS NOMINAL MM
outside_diameter62.2 MILLIMETERS NOMINAL MM
special_featuresDUAL LIP W/O INNER CASE,BORE TITE ON THE O.D.
surface_treatmentPLASTIC CASE
housing_bore_diameter62.0 MILLIMETERS NOMINAL MM
sealing_element_styleVERTICAL
end_item_identificationHYPOID BEVEL GEAR REDUCER
accommodated_shaft_diameter45.0 MILLIMETERS NOMINAL MM
material_document_and_classificationLONGLIFE MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
NSN5330-01-509-1484
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00085311019071 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 8.0 MILLIMETERS NOMINAL MM
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 62.0 MILLIMETERS NOMINAL MM
•
OUTSIDE DIAMETER: 62.2 MILLIMETERS NOMINAL MM
•
ACCOMMODATED SHAFT DIAMETER: 45.0 MILLIMETERS NOMINAL MM
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH8.0 MILLIMETERS NOMINAL MM
SPECIAL FEATURESDUAL LIP W/O INNER CASE,BORE TITE ON THE O.D.
CASE STYLESQUARE
HOUSING BORE DIAMETER62.0 MILLIMETERS NOMINAL MM
OUTSIDE DIAMETER62.2 MILLIMETERS NOMINAL MM
ACCOMMODATED SHAFT DIAMETER45.0 MILLIMETERS NOMINAL MM
SEALING ELEMENT STYLEVERTICAL
END ITEM IDENTIFICATIONHYPOID BEVEL GEAR REDUCER
MATERIAL DOCUMENT AND CLASSIFICATIONLONGLIFE MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
MATERIALSTEEL SPRING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
17753MInterchangeable
interchangeable cross-reference
interchangeable
17753Interchangeable
interchangeable cross-reference
interchangeable
984638-1CInterchangeable
interchangeable cross-reference
interchangeable
100A/90WM/120VInterchangeable
interchangeable cross-reference
interchangeable
100A-90A/EWInterchangeable
interchangeable cross-reference
interchangeable
17753-17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00085311019071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00085311019071?
00085311019071 is a SEAL,PLAIN ENCASED.
What parts can replace 00085311019071?
There are 14 known substitutes for 00085311019071: 17753M, 17753, 984638-1C and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00085311019071?
00085311019071 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-509-1484. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00085311019071

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026