PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00052 STYLE 5
00052 STYLE 5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.063 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.375 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, flange_thickness: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-171-7670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00052 STYLE 5
NSN: 5325-00-171-7670
FSC: 5325
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.063 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.375 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
flange_thickness0.094 INCHES NOMINAL IN
features_providedCOOLANT RESISTANT AND OIL RESISTANT
groove_outside_diameter0.500 INCHES NOMINAL IN
grommet_construction_typeSOLID
large_flange_outside_diameter0.625 INCHES NOMINAL IN
NSN5325-00-171-7670
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 00052 STYLE 5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET CONSTRUCTION TYPE: SOLID
•
FLANGE THICKNESS: 0.094 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
GROMMET STYLE: ROUND
•
NONMETALLIC HARDNESS RATING: 55.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.428 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
GROMMET CONSTRUCTION TYPESOLID
FLANGE THICKNESS0.094 INCHES NOMINAL IN
HOLE DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.250 INCHES NOMINAL IN
GROMMET STYLEROUND
NONMETALLIC HARDNESS RATING55.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
GROOVE WIDTH0.062 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.428 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
LARGE FLANGE OUTSIDE DIAMETER0.656 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2GK75Interchangeable
interchangeable cross-reference
interchangeable
1043Interchangeable
interchangeable cross-reference
interchangeable
M2R53P5Interchangeable
interchangeable cross-reference
interchangeable
218K2Interchangeable
interchangeable cross-reference
interchangeable
914144Interchangeable
interchangeable cross-reference
interchangeable
4981978-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00052 STYLE 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00052 STYLE 5?
00052 STYLE 5 is a GROMMET,NONMETALLIC.
What parts can replace 00052 STYLE 5?
There are 6 known substitutes for 00052 STYLE 5: 2GK75, 1043, M2R53P5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00052 STYLE 5?
00052 STYLE 5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-171-7670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00052 STYLE 5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026