PartsTable
Technical Data Sheet
Download PDF

00052 (STYLE 1) — GROMMET,NONMETALLIC

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

00052 (STYLE 1): GROMMET,NONMETALLIC.

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, part_name_assigned_by_controlling_agency: GROMMET. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-089-6159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00052 (STYLE 1)
NSN: 5325-00-089-6159
NIINs: 000896159, 002024433, 002496350, 002625949, 002636641, 002764265, 002766087, 002816609, 002866046, 002904344, 002910721, 005509356, 005999270, 006374156, 007279758, 007307048, 008272057, 008365982, 008824438, 009285929, 015556326
FSC: 5325 — Fastening Devices
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
part_name_assigned_by_controlling_agencyGROMMET
NSN5325-00-089-6159
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 00052 (STYLE 1) · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET STYLE: ROUND
•
FLANGE THICKNESS: 0.094 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SOLID
•
MATERIAL: RUBBER NATURAL OVERALL
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES NOMINAL IN
GROMMET STYLEROUND
FLANGE THICKNESS0.094 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.625 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
MATERIALRUBBER NATURAL OVERALL
GROOVE WIDTH0.062 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING60.0 NOMINAL SHORE DUROMETER A
HOLE DIAMETER0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
00052 STYLE 4Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA2522Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 00052 (STYLE 1)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00052 (STYLE 1)?
00052 (STYLE 1) is a GROMMET,NONMETALLIC.
What parts can replace 00052 (STYLE 1)?
There are 2 known substitutes for 00052 (STYLE 1): 00052 STYLE 4, AA2522. Substitute compatibility should be verified for your specific system.
What is the NSN for 00052 (STYLE 1)?
00052 (STYLE 1) is cataloged in the U.S. Government catalog under NSN 5325-00-089-6159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00052 (STYLE 1)

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.