PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00044 TYPE TY 1 CASE TY 3B ELEME
00044 TYPE TY 1 CASE TY 3B ELEME ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.656 INCHES NOMINAL IN, surface_treatment: ZINC CASE, housing_bore_diameter: 4.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-7140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00044 TYPE TY 1 CASE TY 3B ELEME
NSN: 5330-00-291-7140
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.656 INCHES NOMINAL IN
surface_treatmentZINC CASE
housing_bore_diameter4.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-7140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00044 TYPE TY 1 CASE TY 3B ELEME MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.250 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: ZINC CASE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER SEALING ELEMENT
•
SEAL WIDTH: 0.656 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER4.250 INCHES NOMINAL IN
CASE STYLESQUARE
SURFACE TREATMENTZINC CASE
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER SEALING ELEMENT
SEAL WIDTH0.656 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
SAE-AMS-QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
61227Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
61227-2Interchangeable
interchangeable cross-reference
interchangeable
235086Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00044 TYPE TY 1 CASE TY 3B ELEME?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00044 TYPE TY 1 CASE TY 3B ELEME?
00044 TYPE TY 1 CASE TY 3B ELEME is a SEAL,PLAIN ENCASED.
What parts can replace 00044 TYPE TY 1 CASE TY 3B ELEME?
There are 6 known substitutes for 00044 TYPE TY 1 CASE TY 3B ELEME: SAE-AMS-QQ-A-200/8, 61227, AMS-QQ-A-200/8 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00044 TYPE TY 1 CASE TY 3B ELEME?
00044 TYPE TY 1 CASE TY 3B ELEME is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-7140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00044 TYPE TY 1 CASE TY 3B ELEME

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026