PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00044 TYPE 2B CASE TYPE 1
00044 TYPE 2B CASE TYPE 1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 8.0 MILLIMETERS NOMINAL MM, outside_diameter: 90.2 MILLIMETERS NOMINAL MM, special_features: RUBBER BASE PAINT/BORE-TITE/CAGEC 80201, surface_treatment: PAINT CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-241-2702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00044 TYPE 2B CASE TYPE 1
NSN: 5330-01-241-2702
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width8.0 MILLIMETERS NOMINAL MM
outside_diameter90.2 MILLIMETERS NOMINAL MM
special_featuresRUBBER BASE PAINT/BORE-TITE/CAGEC 80201
surface_treatmentPAINT CASE
housing_bore_diameter90.0 MILLIMETERS NOMINAL MM
sealing_element_styleVERTICAL
accommodated_shaft_diameter68.0 MILLIMETERS NOMINAL MM
NSN5330-01-241-2702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00044 TYPE 2B CASE TYPE 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
25420Interchangeable
interchangeable cross-reference
interchangeable
551189Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
00044 TYPE 2B CASE TYPE 1Interchangeable
interchangeable cross-reference
interchangeable
10560384Interchangeable
interchangeable cross-reference
interchangeable
3174AS4581Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00044 TYPE 2B CASE TYPE 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00044 TYPE 2B CASE TYPE 1?
00044 TYPE 2B CASE TYPE 1 is a SEAL,PLAIN ENCASED.
What parts can replace 00044 TYPE 2B CASE TYPE 1?
There are 8 known substitutes for 00044 TYPE 2B CASE TYPE 1: 25420, 551189, 00044 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00044 TYPE 2B CASE TYPE 1?
00044 TYPE 2B CASE TYPE 1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-241-2702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00044 TYPE 2B CASE TYPE 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026