PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00033020
00033020 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.750 INCHES NOMINAL IN, overall_length: 5.750 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 5.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-274-7838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00033020
NSN: 5330-00-274-7838
FSC: 5330
CAGE: 11939 — KIDDE FIRE FIGHTING, INC. DIV NATIONAL FOAM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.750 INCHES NOMINAL IN
overall_length5.750 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter5.031 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.500 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.500 INCHES NOMINAL IN
NSN5330-00-274-7838
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00033020 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 4.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
OVERALL LENGTH5.750 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.500 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH4.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH5.750 INCHES NOMINAL IN
APERTURE DIAMETER5.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
5P3455Interchangeable
interchangeable cross-reference
interchangeable
RD10721Interchangeable
interchangeable cross-reference
interchangeable
D-751-56Interchangeable
interchangeable cross-reference
interchangeable
200330Interchangeable
interchangeable cross-reference
interchangeable
13064236Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00033020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00033020?
00033020 is a GASKET.
What parts can replace 00033020?
There are 5 known substitutes for 00033020: 5P3455, RD10721, D-751-56 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00033020?
00033020 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-274-7838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00033020

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026