PartsTable
Technical Data Sheet
Download PDF

0003216EE — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0003216EE: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.387 INCHES NOMINAL IN, center_hole_diameter: 1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-106-2386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0003216EE
NSN: 5330-01-106-2386
FSC: 5330 — Packing and Gasket Materials
CAGE: 54716 — HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.387 INCHES NOMINAL IN
center_hole_diameter1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-106-2386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0003216EE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
PERIPHERAL DIAMETER: 1.387 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZY
ELONGATION PERCENTAGE125 MAXIMUM
PERIPHERAL DIAMETER1.387 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 9
M83248/1-216CPReference document
Same NSN cross-reference
Reference document — Secondary reference
4400571-2160CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PL-1596 ITEM 11Reference document
Same NSN cross-reference
Reference document — Secondary reference
C-6982/2715 PIECE 11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
283852-0001 ITEM 61CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
00216XXReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0003216EE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0003216EE?
0003216EE is a PACKING,PREFORMED.
What parts can replace 0003216EE?
There are 9 known substitutes for 0003216EE: M83248/1-216CP, 4400571-2160CP, PL-1596 ITEM 11 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0003216EE?
0003216EE is cataloged in the U.S. Government catalog under NSN 5330-01-106-2386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0003216EE

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.