PartsTable
Technical Data Sheet
Download PDF

0003-0096-201 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0003-0096-201: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, block_height: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN, overall_length: 3.750 INCHES NOMINAL3.750 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-385-4497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0003-0096-201
NSN: 5340-01-385-4497
FSC: 5340 — Hardware, Commercial
CAGE: 06032 — ANTENNA PRODUCTS CORPORATION DBA ANTENNA PRODUCTS CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
block_height0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
overall_length3.750 INCHES NOMINAL3.750 INCHES NOMINAL IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatmentPLASTIC POLYURETHANE
clamping_hole_diameter0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM ALL HOLES IN
clamping_hole_quantity2
mounting_hole_diameter0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
mounting_hole_quantity22
cable_diameter_for_which_designed0.375 INCHES NOMINAL ALL HOLES IN
NSN5340-01-385-4497
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0003-0096-201 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 2
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-53059,COLOR GREEN NO. 383 MIL SPEC SINGLE TREATMENT RESPONSE
•
BLOCK HEIGHT: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
CLAMPING HOLE QUANTITY2
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-53059,COLOR GREEN NO. 383 MIL SPEC SINGLE TREATMENT RESPONSE
BLOCK HEIGHT0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
OVERALL LENGTH3.750 INCHES NOMINAL3.750 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0003-0096-201?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0003-0096-201?
0003-0096-201 is a CLAMP,BLOCK,SECTION.
What is the NSN for 0003-0096-201?
0003-0096-201 is cataloged in the U.S. Government catalog under NSN 5340-01-385-4497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0003-0096-201

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.