PartsTable
Technical Data Sheet
PartsTable / O-RING / 000224EB
000224EB ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN, center_hole_diameter: 1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-316-3406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000224EB
NSN: 5331-00-316-3406
FSC: 5331 — O-RING
CAGE: 99565 — ADMIRAL VALVE LLC DBA CPV MANUFACTURING (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
center_hole_diameter1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5331-00-316-3406
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000224EB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.734 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.734 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MS28775-224Interchangeable
interchangeable cross-reference
interchangeable
230079114Interchangeable
interchangeable cross-reference
interchangeable
5330006413407Interchangeable
interchangeable cross-reference
interchangeable
2640-901X7 PIECE 65Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-25732Interchangeable
interchangeable cross-reference
interchangeable
7255-264 PC43Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 000224EB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000224EB?
000224EB is a O-RING.
What parts can replace 000224EB?
There are 8 known substitutes for 000224EB: MS28775-224, 230079114, 5330006413407 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 000224EB?
000224EB is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-316-3406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000224EB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026