PartsTable
Technical Data Sheet
Download PDF

000215EDCP — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

000215EDCP: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.306 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN, center_hole_diameter: 1.036 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-039-2516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000215EDCP
NSN: 5330-01-039-2516
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.306 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN
center_hole_diameter1.036 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-039-2516
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000215EDCP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
PERIPHERAL DIAMETER: 1.306 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.036 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZY
PERIPHERAL DIAMETER1.306 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.036 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 8
ARP568-215E540-8CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PL3919 PIECE 14CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-215E540-8CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ARP568-21E540-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-215E540-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-215E540Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 000215EDCP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000215EDCP?
000215EDCP is a PACKING,PREFORMED.
What parts can replace 000215EDCP?
There are 8 known substitutes for 000215EDCP: ARP568-215E540-8CP, PL3919 PIECE 14CP, 2-215E540-8CP and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 000215EDCP?
000215EDCP is cataloged in the U.S. Government catalog under NSN 5330-01-039-2516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000215EDCP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.