PartsTable
Technical Data Sheet
000213EE ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.199 INCHES NOMINAL IN, center_hole_diameter: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-039-5648, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000213EE
NSN: 5330-01-039-5648
FSC: 5330
CAGE: 70040 — GENERAL MOTORS LLC DBA GENERAL MOTORS (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.199 INCHES NOMINAL IN
center_hole_diameter0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5330-01-039-5648
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000213EE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CRITICALITY CODE JUSTIFICATION: ZZZY
TECHNICAL CHARACTERISTICS (FLIS)
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CRITICALITY CODE JUSTIFICATIONZZZY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
02704Interchangeable
interchangeable cross-reference
interchangeable
MIL-STD-1330Interchangeable
interchangeable cross-reference
interchangeable
11860-09-4Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-212CPInterchangeable
interchangeable cross-reference
interchangeable
516-5343916-F19Interchangeable
interchangeable cross-reference
interchangeable
TC11264-2MKEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 000213EE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000213EE?
000213EE is a O-RING.
What parts can replace 000213EE?
There are 27 known substitutes for 000213EE: 02704, MIL-STD-1330, 11860-09-4 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 000213EE?
000213EE is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-039-5648. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000213EE