PartsTable
Technical Data Sheet
Download PDF

000110237 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

000110237: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, diameter: 1.250 INCHES NOMINAL IN, special_features: FLANGE FLATTENED ON ONE EDGE,0.480 IN. CENTER TO FLAT DISTANCE; THREAD RELIEF GROOVE,0.522 IN.

TO 0.527 IN. I.D. IN, style_designator: PROJECTION ONE END LEFT INTERNAL THREAD, cross-sectional_shape: ROUND.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-011-0237, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000110237
NSN: 5340-00-011-0237
FSC: 5340 — Hardware, Commercial
CAGE: 1TMD7 — Y 2 K MACHINE SHOP INC (USA)
SPECIFICATIONS
length0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
diameter1.250 INCHES NOMINAL IN
special_featuresFLANGE FLATTENED ON ONE EDGE,0.480 IN. CENTER TO FLAT DISTANCE; THREAD RELIEF GROOVE,0.522 IN. TO 0.527 IN. I.D. IN
style_designatorPROJECTION ONE END LEFT INTERNAL THREAD
cross-sectional_shapeROUND
NSN5340-00-011-0237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000110237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PROJECTION ONE END LEFT INTERNAL THREAD
•
DIAMETER: 1.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND
TECHNICAL CHARACTERISTICS
LENGTH0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
STYLE DESIGNATORPROJECTION ONE END LEFT INTERNAL THREAD
DIAMETER1.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND
SPECIAL FEATURESFLANGE FLATTENED ON ONE EDGE,0.480 IN. CENTER TO FLAT DISTANCE; THREAD RELIEF GROOVE,0.522 IN. TO 0.527 IN. I.D. IN
SUBSTITUTES & CROSS-REFERENCES 1
6-40683-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 000110237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000110237?
000110237 is a STANDOFF,THREADED,SPACING.
What parts can replace 000110237?
There is 1 known substitute for 000110237: 6-40683-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 000110237?
000110237 is cataloged in the U.S. Government catalog under NSN 5340-00-011-0237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000110237

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.