PartsTable
Technical Data Sheet
Download PDF

0001.0039.R — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0001.0039.R: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, special_features: CROSS-SECTIONAL SHAPE STYLE: O-RING, peripheral_diameter: 1.879 INCHES NOMINAL IN, center_hole_diameter: 1.724 INCHES MINIMUM AND 1.754 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-8391, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0001.0039.R
NSN: 5331-00-166-8391
NIINs: 001668391, 012210678
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
special_featuresCROSS-SECTIONAL SHAPE STYLE: O-RING
peripheral_diameter1.879 INCHES NOMINAL IN
center_hole_diameter1.724 INCHES MINIMUM AND 1.754 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-83248,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPACKING,PREFORMED
NSN5331-00-166-8391
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0001.0039.R MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.858 INCHES MINIMUM AND 1.900 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 1.724 INCHES MINIMUM AND 1.754 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.858 INCHES MINIMUM AND 1.900 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER1.724 INCHES MINIMUM AND 1.754 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 8
M83248/1-031Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
705B504P23Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
5331PL0653309Reference document
Same NSN cross-reference
Reference document — Informative reference only
M83485/1-031Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-031V0747-75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-031V747-75Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 0001.0039.R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0001.0039.R?
0001.0039.R is a O-RING.
What parts can replace 0001.0039.R?
There are 8 known substitutes for 0001.0039.R: M83248/1-031, 705B504P23, 5331PL0653309 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0001.0039.R?
0001.0039.R is cataloged in the U.S. Government catalog under NSN 5331-00-166-8391. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0001.0039.R

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.