PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00008587441810
00008587441810 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include outside_diameter: 5.125 INCHES NOMINAL IN, special_features: TREATED, aperture_diameter: 3.375 INCHES NOMINAL IN, cross-sectional_height: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-192-7115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00008587441810
NSN: 5330-01-192-7115
FSC: 5330
CAGE: 59773 — P AND M MFG CO DIV OF PLUMBMASTER INC (USA)
SPECIFICATIONS
outside_diameter5.125 INCHES NOMINAL IN
special_featuresTREATED
aperture_diameter3.375 INCHES NOMINAL IN
cross-sectional_height0.750 INCHES NOMINAL IN
NSN5330-01-192-7115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00008587441810 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 3.375 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 5.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER3.375 INCHES NOMINAL IN
SPECIAL FEATURESTREATED
OUTSIDE DIAMETER5.125 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
MPI 9Interchangeable
interchangeable cross-reference
interchangeable
MPI 9-001P-16187-AEROSOLInterchangeable
interchangeable cross-reference
interchangeable
44181Interchangeable
interchangeable cross-reference
interchangeable
6218207Interchangeable
interchangeable cross-reference
interchangeable
1899 KInterchangeable
interchangeable cross-reference
interchangeable
C22728Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00008587441810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00008587441810?
00008587441810 is a FELT,MECHANICAL,PREFORMED.
What parts can replace 00008587441810?
There are 6 known substitutes for 00008587441810: MPI 9, MPI 9-001P-16187-AEROSOL, 44181 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00008587441810?
00008587441810 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-192-7115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00008587441810

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026