PartsTable
Technical Data Sheet
PartsTable / O-RING / 000014EE
000014EE ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include end_item_identification: VALVE, GLOBE .25 IN; LIFE SUPPORT EQUIPMENT EBS MANIFOLD INSTALLATION IN, part_name_assigned_by_controlling_agency: ASSEMBLY, IN-LINE GAGE ROOT VALVES, .250 NPS (DRAWING). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-235-5262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
000014EE
NSN: 5331-00-235-5262
FSC: 5331 — O-RING
CAGE: 99565 — ADMIRAL VALVE LLC DBA CPV MANUFACTURING (USA)
SPECIFICATIONS
end_item_identificationVALVE, GLOBE .25 IN; LIFE SUPPORT EQUIPMENT EBS MANIFOLD INSTALLATION IN
part_name_assigned_by_controlling_agencyASSEMBLY, IN-LINE GAGE ROOT VALVES, .250 NPS (DRAWING)
NSN5331-00-235-5262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 000014EE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
•
OUTSIDE DIAMETER: 0.629 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23652,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
OUTSIDE DIAMETER0.629 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23652,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
AS3209-116Interchangeable
interchangeable cross-reference
interchangeable
5-0-51-08-3Interchangeable
interchangeable cross-reference
interchangeable
QD1004-116Interchangeable
interchangeable cross-reference
interchangeable
22046-14Interchangeable
interchangeable cross-reference
interchangeable
MILR25897Interchangeable
interchangeable cross-reference
interchangeable
4400173-0140Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 000014EE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 000014EE?
000014EE is a O-RING.
What parts can replace 000014EE?
There are 25 known substitutes for 000014EE: AS3209-116, 5-0-51-08-3, QD1004-116 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 000014EE?
000014EE is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-235-5262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 000014EE

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026