PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00-0213
00-0213 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include end_item_identification: METABOLIC CHEMISTRY PANEL FOR NSN 6630-01-415-1593, PICCOLO CHEMISTRY ANALYZER, part_name_assigned_by_controlling_agency: TEST DISC BLOOD ANALYZER 10S E.I. 6630-01-415-1593.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-498-2381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00-0213
NSN: 5310-00-498-2381
FSC: 5310
CAGE: 99062 — TUTHILL CORPORATION DBA REYCO/GRANNING DIV REYCO GRANNING (USA)
SPECIFICATIONS
end_item_identificationMETABOLIC CHEMISTRY PANEL FOR NSN 6630-01-415-1593, PICCOLO CHEMISTRY ANALYZER
part_name_assigned_by_controlling_agencyTEST DISC BLOOD ANALYZER 10S E.I. 6630-01-415-1593
NSN5310-00-498-2381
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00-0213 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
SURFACE TREATMENT: CADMIUM NUT
•
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD QUANTITY PER INCH: 16
•
BEARING SURFACE FINISH: 110.0 MICROINCHES
•
BEARING SURFACE TYPE: CHAMFERED
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
THREAD SERIES: UNF
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATIONDRY FILM LUBRICANT
SURFACE TREATMENTCADMIUM NUT
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD QUANTITY PER INCH16
BEARING SURFACE FINISH110.0 MICROINCHES
BEARING SURFACE TYPECHAMFERED
NOMINAL THREAD SIZE0.750 INCHES IN
THREAD SERIESUNF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONG-4341M,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
RV1 7/8-S218Interchangeable
interchangeable cross-reference
interchangeable
AMB-420Interchangeable
interchangeable cross-reference
interchangeable
R22-1549Interchangeable
interchangeable cross-reference
interchangeable
94179Interchangeable
interchangeable cross-reference
interchangeable
PWA52164Interchangeable
interchangeable cross-reference
interchangeable
400-0006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00-0213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00-0213?
00-0213 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 00-0213?
There are 15 known substitutes for 00-0213: RV1 7/8-S218, AMB-420, R22-1549 and 12 more. Substitute compatibility should be verified for your specific system.
Is 00-0213 still available?
00-0213 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00-0213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026