PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0.75010UNC2BT1G5NSBAM
0.75010UNC2BT1G5NSBAM ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 0.75010UNC2BT1G5NSBAM is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-244-6547, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0.75010UNC2BT1G5NSBAM
NSN: 5310-01-244-6547
FSC: 5310
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part Number0.75010UNC2BT1G5NSBAM
NSN5310-01-244-6547
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0.75010UNC2BT1G5NSBAM · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
BEARING SURFACE TYPE: FLAT OR WASHER FACED
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 10
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
WIDTH ACROSS FLATS1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
BEARING SURFACE TYPEFLAT OR WASHER FACED
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH10
NOMINAL THREAD SIZE0.750 INCHES IN
CRITICALITY CODE JUSTIFICATIONZZZY
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A 153 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MIL-S-1222Interchangeable
interchangeable cross-reference
interchangeable
000.750-10UNC-2BInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-1222Interchangeable
interchangeable cross-reference
interchangeable
124-5588671 PCInterchangeable
interchangeable cross-reference
interchangeable
5716Interchangeable
interchangeable cross-reference
interchangeable
124-5563772 PCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0.75010UNC2BT1G5NSBAM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0.75010UNC2BT1G5NSBAM?
0.75010UNC2BT1G5NSBAM is a 0.75010UNC2BT1G5NSBAM.
What parts can replace 0.75010UNC2BT1G5NSBAM?
There are 21 known substitutes for 0.75010UNC2BT1G5NSBAM: MIL-S-1222, 000.750-10UNC-2B, MIL-DTL-1222 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0.75010UNC2BT1G5NSBAM?
0.75010UNC2BT1G5NSBAM is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-244-6547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0.75010UNC2BT1G5NSBAM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026