PartsTable
Technical Data Sheet
Download PDF

0.180IDX0.035W COMPOUND F80 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0.180IDX0.035W COMPOUND F80: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, center_hole_diameter: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.032 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-030-1827, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0.180IDX0.035W COMPOUND F80
NSN: 5331-01-030-1827
FSC: 5331 — O-ring
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
center_hole_diameter0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.032 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
NSN5331-01-030-1827
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0.180IDX0.035W COMPOUND F80 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.032 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.032 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 4
0.180IDX0.035W COMPOUND L677-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
0.180IDX0.035W COMPOUND 11647Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0.180IDX0.035W COMPOUND TH-1057Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0.180IDX0.035W COMPOUND 1393-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0.180IDX0.035W COMPOUND F80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0.180IDX0.035W COMPOUND F80?
0.180IDX0.035W COMPOUND F80 is a O-RING.
What parts can replace 0.180IDX0.035W COMPOUND F80?
There are 4 known substitutes for 0.180IDX0.035W COMPOUND F80: 0.180IDX0.035W COMPOUND L677-70, 0.180IDX0.035W COMPOUND 11647, 0.180IDX0.035W COMPOUND TH-1057 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0.180IDX0.035W COMPOUND F80?
0.180IDX0.035W COMPOUND F80 is cataloged in the U.S. Government catalog under NSN 5331-01-030-1827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0.180IDX0.035W COMPOUND F80