PartsTable
Technical Data Sheet

0-511/2-5 — BEARING,BALL,ANNULAR

✓ Government record, cited
Legrand · TAPERED BEARING
PRODUCT OVERVIEW

0-511/2-5: BEARING,BALL,ANNULAR.

Conform to BS EN 60309-1, BS EN 60309-2, IEC 60309-1 and IEC 60309-2 IP according to BS EN 60529 and IEC 60529 IK 09 Self-extinguishing: 850°C for insulated parts, 650°C for housing Stainless steel external screws - Nickel plated brass contacts Temp. rating: -50°C to +100°C This part is cataloged in the U.S. Government catalog under NSN 3110-00-554-3232, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0-511/2-5
NSN: 3110-00-554-3232
NIINs: 005543232, 013393384, 013940407, 015311942
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 06889 — BIG JOE MFG CO (USA)
SPECIFICATIONS
special_featuresSET DESIGNED FOR THE FABRICATION OF EYEGLASS LENS THROUGH MOLYMET CASTING TECHNOLOGY; THIS SET USES THE OPTICAST CASTING SYSTEM; FOR LIST OF COMPONENTS SEE UA 006A A
part_name_assigned_by_controlling_agencyOES MULTIVISION AUGMENTATION-2005 UA 006A A
NSN3110-00-554-3232
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0-511/2-5 · Legrand ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 47.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER47.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 10
T8601330P95Reference document
Same NSN cross-reference
Reference document — Secondary reference
A181-28Reference document
Same NSN cross-reference
Reference document — Secondary reference
C31-10084-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
CW74Reference document
Same NSN cross-reference
Reference document — Secondary reference
HU1495Reference document
Same NSN cross-reference
Reference document — Secondary reference
3204X1AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0-511/2-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-511/2-5?
0-511/2-5 is a BEARING,BALL,ANNULAR manufactured by Legrand.
What parts can replace 0-511/2-5?
There are 10 known substitutes for 0-511/2-5: T8601330P95, A181-28, C31-10084-6 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0-511/2-5?
0-511/2-5 is cataloged in the U.S. Government catalog under NSN 3110-00-554-3232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-511/2-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.