PartsTable
Technical Data Sheet
Download PDF

0-4000600 — SEAL,STRAPPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0-4000600: SEAL,STRAPPING.

The SEAL,STRAPPING is a the manufacturer industrial component. Key specifications include width: 0.400 INCHES NOMINAL IN, length: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN, material: STEEL, design_type: OPEN, sealing_tool_name: STANLEY, sealing_tool_model_number: 0-4000600. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-157-5610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0-4000600
NSN: 5340-00-157-5610
FSC: 5340 — Hardware, Commercial
CAGE: 09713 — COLD METAL PRODUCTS, LIMITED (CAN)
SPECIFICATIONS
width0.400 INCHES NOMINAL IN
length0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
materialSTEEL
design_typeOPEN
sealing_tool_nameSTANLEY
sealing_tool_model_number0-4000600
strapping_type_for_which_designedNONMETALLIC OR STEEL
strapping_width_for_which_designed0.375 INCHES NOMINAL IN
sealing_equipment_for_which_designedSEALING TOOL
NSN5340-00-157-5610
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0-4000600 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRAPPING WIDTH FOR WHICH DESIGNED: 0.375 INCHES NOMINAL IN
•
SEALING TOOL NAME: STANLEY
•
STRAPPING TYPE FOR WHICH DESIGNED: NONMETALLIC OR STEEL
•
LENGTH: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
•
SEALING TOOL MODEL NUMBER: 0-4000600
•
SEALING EQUIPMENT FOR WHICH DESIGNED: SEALING TOOL
•
DESIGN TYPE: OPEN
•
EARS: INCLUDED
TECHNICAL CHARACTERISTICS
STRAPPING WIDTH FOR WHICH DESIGNED0.375 INCHES NOMINAL IN
SEALING TOOL NAMESTANLEY
STRAPPING TYPE FOR WHICH DESIGNEDNONMETALLIC OR STEEL
LENGTH0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
SEALING TOOL MODEL NUMBER0-4000600
SEALING EQUIPMENT FOR WHICH DESIGNEDSEALING TOOL
DESIGN TYPEOPEN
EARSINCLUDED
WIDTH0.400 INCHES NOMINAL IN
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
P9923Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 0-4000600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-4000600?
0-4000600 is a SEAL,STRAPPING.
What parts can replace 0-4000600?
There is 1 known substitute for 0-4000600: P9923. Substitute compatibility should be verified for your specific system.
What is the NSN for 0-4000600?
0-4000600 is cataloged in the U.S. Government catalog under NSN 5340-00-157-5610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-4000600