PartsTable
Technical Data Sheet
Download PDF

0-246-24 — RESTRICTOR,FLUID FLOW

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

0-246-24: RESTRICTOR,FLUID FLOW.

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include phase: SINGLE, material: COPPER ALLOY BODY, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 2A ALL ENDS A, connection_style: FLARED (TUBE) ALL ENDS, style_designator: STRAIGHT THRU. This part is cataloged in the U.S.

Government catalog under NSN 4810-00-012-4803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0-246-24
NSN: 4810-00-012-4803
FSC: 4810 — Valves, Powered
CAGE: 90581 — SWEDEN FREEZER MFG CO (USA)
SPECIFICATIONS
phaseSINGLE
materialCOPPER ALLOY BODY
seat_angle37.0 DEGREES ALL ENDS
thread_class2A ALL ENDS A
connection_styleFLARED (TUBE) ALL ENDS
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND ALL ENDS
aperture_diameter0.187 INCHES NOMINAL IN
frequency_in_hertz60.0
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_devicePISTON
nominal_thread_size0.625 INCHES ALL ENDS IN
NSN4810-00-012-4803
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 0-246-24 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: PISTON
•
PHASE: SINGLE
•
FREQUENCY IN HERTZ: 60.0
•
VOLTAGE IN VOLTS AND CURRENT TYPE: 460.0 AC
•
CONNECTION STYLE: FLARED (TUBE) ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
APERTURE DIAMETER: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEPISTON
PHASESINGLE
FREQUENCY IN HERTZ60.0
VOLTAGE IN VOLTS AND CURRENT TYPE460.0 AC
CONNECTION STYLEFLARED (TUBE) ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
APERTURE DIAMETER0.187 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE0.625 INCHES ALL ENDS IN
SUBSTITUTES & CROSS-REFERENCES 2
70005-118Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
73F3-70005-118Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0-246-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-246-24?
0-246-24 is a RESTRICTOR,FLUID FLOW.
What parts can replace 0-246-24?
There are 2 known substitutes for 0-246-24: 70005-118, 73F3-70005-118. Substitute compatibility should be verified for your specific system.
What is the NSN for 0-246-24?
0-246-24 is cataloged in the U.S. Government catalog under NSN 4810-00-012-4803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-246-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.