PartsTable
Technical Data Sheet
Download PDF

0-1042-0001 — SCREW,EXTERNALLY RELIEVED BODY

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

0-1042-0001: SCREW,EXTERNALLY RELIEVED BODY.

The SCREW,EXTERNALLY RELIEVED BODY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: FILLISTER, head_height: 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-459-7519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0-1042-0001
NSN: 5305-00-459-7519
FSC: 5305 — Screws
CAGE: 28100 — ALLISON MFG CO DIV OF BEATRICE FOODS (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_styleFILLISTER
head_height0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
fastener_length0.711 INCHES MINIMUM AND 0.789 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
first_diameter_from_head0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
NSN5305-00-459-7519
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0-1042-0001 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.711 INCHES MINIMUM AND 0.789 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST DIAMETER FROM HEAD: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FILLISTER
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
FASTENER LENGTH0.711 INCHES MINIMUM AND 0.789 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST DIAMETER FROM HEAD0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.485 INCHES MINIMUM AND 0.581 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
6238SS0632Reference document
Same NSN cross-reference
Reference document — Secondary reference
007811Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7902788-06Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305009956843Reference document
Same NSN cross-reference
Reference document — Informative reference only
222569-004Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
610074P18Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0-1042-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-1042-0001?
0-1042-0001 is a SCREW,EXTERNALLY RELIEVED BODY.
What parts can replace 0-1042-0001?
There are 8 known substitutes for 0-1042-0001: 6238SS0632, 007811, 7902788-06 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0-1042-0001?
0-1042-0001 is cataloged in the U.S. Government catalog under NSN 5305-00-459-7519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-1042-0001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.