PartsTable / O-RING / 0-010-3
0-010-3
✓ Verified by PartsTable
SES Creative · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
A must-have for every fashionable designer! This colourful pencil case can be personalized with many glitters, colourful beads, pom poms and glossy stickers. Key specifications include document_type: PARTS LIST, end_item_name: ACTUATOR,ELECTRO-MECH., document_source: 81817, end_item_source: 81817, component_quantity: 107, document_identification: 0010-3. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-2522, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
0-010-3
NSN: 5331-00-582-2522 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
document_type PARTS LIST end_item_name ACTUATOR,ELECTRO-MECH. document_source 81817 end_item_source 81817 component_quantity 107 document_identification 0010-3 end_item_identification 1680-00-554-2057 component_document_origin GOVERNMENT nonsupply_items_and_quantities KEY 5;BUSHING 6;BRUSH,ELEC. 2;SCREW 14;WASHER 8;SHIM 26;SPRING 1;PIN 12;ROD,GUIDE 1;CLAMP,CABLE 2;SPACER 3;STRAP,GROUND 1;INSULATOR 1;DISK ASSY 1;RING 1;BEARING 10;NUT,FLEX 4;PLATE,DATA 1 NSN 5331-00-582-2522
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 0-010-3
MFR: SES Creative
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN CENTER HOLE DIAMETER 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
0010-3 Interchangeable interchangeable cross-reference
interchangeable
0010-1 Interchangeable interchangeable cross-reference
interchangeable
0010-2 Interchangeable interchangeable cross-reference
interchangeable
2-010B278-7 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 0-010-3?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-010-3?
0-010-3 is a PARTS KIT,ELECTRO-MECHANICAL LIN manufactured by SES Creative.
What parts can replace 0-010-3?
There are 8 known substitutes for 0-010-3: 0010-3, 0010-1, 0010-2 and 5 more. Substitute compatibility should be verified for your specific system.
Is 0-010-3 still available?
0-010-3 is currently cancelled.
Request a Quote — 0-010-3