0(.060)-80NF-2AX5/8L — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

0(.060)-80NF-2AX5/8L: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_length: 0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING OR STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-150-3083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

0(.060)-80NF-2AX5/8L

NSN: 5305-00-150-3083
FSC: 5305 — Screws
CAGE: 06641 — CENTURY FASTENERS CORP. DBA CENTURY FASTENERS CORP (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_length	0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_material	STEEL CORROSION RESISTING OR STEEL
fastener_length	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	SLOT
nominal_thread_diameter	0.060 INCHES IN
screw_surface_treatment	PASSIVATE
minimum_tensile_strength	80000 POUNDS PER SQUARE INCH LBS
NSN	5305-00-150-3083

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: PASSIVATE

•

FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE

•

THREAD LENGTH: 0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.060 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
THREAD LENGTH	0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.060 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL CORROSION RESISTING OR STEEL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 2

117356-15Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

117356Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 0(.060)-80NF-2AX5/8L?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 0(.060)-80NF-2AX5/8L?

0(.060)-80NF-2AX5/8L is a SCREW,MACHINE.

What parts can replace 0(.060)-80NF-2AX5/8L?

There are 2 known substitutes for 0(.060)-80NF-2AX5/8L: 117356-15, 117356. Substitute compatibility should be verified for your specific system.

What is the NSN for 0(.060)-80NF-2AX5/8L?

0(.060)-80NF-2AX5/8L is cataloged in the U.S. Government catalog under NSN 5305-00-150-3083. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

0(.060)-80NF-2AX5/8L — SCREW,MACHINE

Request a Quote — 0(.060)-80NF-2AX5/8L